Description
𝐒𝐨𝐟𝐭 𝐒𝐭𝐫𝐚𝐩 – 𝐅𝐢𝐧𝐠𝐞𝐫 𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 𝐆𝐫𝐢𝐩 : The mag safe finger grip holder is equipped with the soft faux leather strap, giving more comfortability when finger slip in and grip the phone and unlike traditional pop up socket which make your fingers hurt. While holding your phone, just push it out and hold two straps to hold your phone. No much unbearable pain to your finger. (Please avoid excessive stretching or swinging.) !!!We don't recommend inserting your finger between the two straps
𝐒𝐧𝐚𝐩, 𝐄𝐚𝐬𝐲 𝐏𝐮𝐬𝐡, 𝐇𝐨𝐥𝐝 : Lightweight: 29g; Size: Φ58mm(outer ring)*Φ41mm(inner ring)*5.8mm(thickness); Popup Soft Leather Length: 0.98″(2.5cm); This newest magnetic phone grip combine an innovative double-ring, soft strap, rotation, kickstand design. With the slightly angle opening, this phone grip can be easily push out from the edge, popping up not only to hold your phone firmly with fingers, also prop your phone
𝐅𝐥𝐞𝐱𝐢𝐛𝐥𝐞 𝟑𝟔𝟎° 𝐑𝐨𝐭𝐚𝐭𝐢𝐨𝐧 𝐒𝐭𝐚𝐧𝐝 : This magnetic phone grip is improved with the smooth 360° inner rotation design, so you can adjust and rotate it to your desired viewing or holding angle without removing it! When using as a phone stand, just align the edges of the phone grip with the corresponding slots, snap and push in firmly
𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐒𝐭𝐫𝐨𝐧𝐠 𝐌𝐚𝐠𝐧𝐞𝐭 : Boasting a super magnetism of 4.4Lbs (20N or 2kg), this magnetic phone strap finger grip can firmly snap to your iPhone 16/15/14/13/12 series, as well as magnetic phone cases. We provide an additional metal ring that increases the maximum load capacity to 4.5kg(45N). If you have a non-magnetic devices or cases, you must apply the metal ring firstly. (Metal Ring Plate may fall off if pulled out the magnetic phone grip holder vertically, so suggest remove the phone grip from the side.)
𝐅𝐢𝐭 𝐚𝐥𝐥 𝐏𝐡𝐨𝐧𝐞𝐬 𝐰𝐢𝐭𝐡 𝐌𝐞𝐭𝐚𝐥 𝐏𝐥𝐚𝐭𝐞 : Directly attahced with iPhone 16, 16 Pro, 16 Pro Max, 16 Plus, iPhone 15, 15 Plus, 15 Pro, 15 Pro Max, iPhone 14, 14 Pro, 14 Pro Max, iPhone 13, 13 Pro, 13 Pro Max, 13 Mini, iPhone 12, 12 Pro, 12 Pro Max, and 12 Mini, as well as MagSafe-enabled phone cases. For non-MagSafe devices or cases, we provide an iron ring(included in the package) to attach the phone grip. Please refer to the instructions for proper installation
𝐈𝐦𝐩𝐨𝐫𝐭𝐚𝐧𝐭 𝐓𝐢𝐩𝐬 : ①This is a one-side magnetic phone grip, you should REMOVE the ring for wireless charging/car mount. If you install the addtional metal ring, it will not affect wireless charging but may affect S-pens. ②The additional metal ring can enhance the magnetism, you can please apply it firstly to ensure the sense of security. ③The position on the phone or phone case to attach the metal ring must be hard material with flat surface, NOT FIT FOR the soft rubber phone case (TPU/PP/TPE/Silicone), also the surface should not be coated with elastic paint or other special coating hard to be adhered
Reviews
There are no reviews yet.